怎麼配置rip路由-ag真人国际官网
ⅰ rip路由協議的配置命令
相關調試命令 :
show ip protocol
show ip route
在全局設置模式下:
1.啟動rip路由
router rip
2.配置rip路由協議的路由的子網
network 子網地址
3.允許在非廣播型網路中進行rip路由廣播
neighbor 相鄰路由器相鄰埠的ip地址
4.配置rip路由協議的版本
rip路由協議有2個版本,在與其它廠商路由器相連時,注意版本要一致,預設狀態下,cisco路由器接收rip版本1和2的路由信息,但只發送版本1的路由信息,設置rip的版本vesion 1或2.另外,還可以控制特定埠發送或接收特定版本的路由信息。
ⅱ rip路由配置命令
1、創建rip進程並進入rip視圖
[router] rip [ process-id ]
2、在指定網段介面上使能rip
[router-rip-1] network network-address [ wildcard-mask ]
3、配置介面工作在抑制狀態
[router-rip-1] silent-interface { interface-type interface-number | all }
4、使能rip水平分割功能
[router-ethernet1/0] rip split-horizon
5、使能rip毒性逆轉功能
[router-ethernet1/0] rip poison-reverse
6、指定全局rip版本
[router-rip-1] version { 1 | 2 }
7、關閉ripv2自動路由聚合功能
[router-rip-1] undo summary
8、配置ripv2報文的認證
[router-ethernet1/0] rip authentication-mode { md5 { rfc2082 { cipher cipher-string | plain plain-string } key-id | rfc2453 { cipher cipher-string | plain plain-string } } | simple { cipher cipher-string | plain plain-string } }